Bloggers,
It's been an exciting semester for the High Rollers. We laughed, we cried, we ate Panda Express, and we engineered. Although our tragic elimination early in the competition was disappointing, we are grateful to our fans all over the world for their support throughout this Balltower season.
The design process was not an easy one, to say the least. We went through several concepts and faced more than a few obstacles and had to adjust strategies and designs to overcome them. One of the main things I think I learned about the design process is the importance of building/prototyping as early as possible. While fine tuning our design we thought about as many factors as we could but when you have an idea of how a system is supposed to work, it is easy to think everything will work out how it should instead of thinking about how components may not interact the way you want them to or something may just not work at all. Getting feedback from outside perspectives through design reviews and
meetings with Serge did help us consider many things we didn't on our
own and we were able to identify and address some of these issues. Our original ball collection design, which relied on hinged acrylic flaps stopping the balls from rolling out from under our machine, would not have been able to retain control of the balls as we drove off the hill due to their size. We adjusted our design for this and made immobile front flaps to keep the balls under control while we drove back onto the level surface of the field. We faced a major setback on the first day we were able to actually test our machine when we realized our single front axle design seriously inhibited the maneuverability of our machine and a miscalculation in our collection arm design limited our ability to execute the original strategy of getting the red squash balls from the top of the hill. I'm confident these are 2 issues we would have been more than able to handle but were just discovered too late for us to properly fix them. Luckily our arm design did still allow us to collect balls from the ground level of the arena as well as reach the black balls on the hillside. The former became our final strategy for the competition.
I think our team worked together very well. We had regular meetings for planning and working on assignments prior to manufacturing and very effectively compartmentalized tasks to most efficiently complete our work on time. We didn't have any real issues with time management, we all held each other accountable and were responsible about getting our work done. We developed good team chemistry pretty early on which really helped us have good communication and made meetings and collaboration more enjoyable.
The lectures for the course definitely had a lot of valuable information and a lot of it helped with our machine design. I think there were times where I felt a disconnect with the lectures and lab and it was hard to tell what material was being emphasized in lecture as being important. I think homework assignments or practice problems similar to questions that would later be on the exam would have helped focus our studying and emphasized relevant information.
I think I put in a good amount of time and effort into the course. An area where I could have improved would have been studying more for the exam and making sure I had a better grasp of all the material from lecture although the review sessions and office hours were very helpful.
Overall, this was a good course. At least for me, it was the first class I had where I was able to go through the entire engineering design and manufacturing process and I think it was a good introduction. I'm excited to continue on and tackle more complicated design problems in courses to come.
Peace out,
Mario
Sunday, December 9, 2012
Design Expo
Hey Bloggers,
Just wanted to recap on how the design expo went. Judging by how well we did during lab on Wednesday, we should have beat our opponent during round 0 since we were seeded higher than them. Unfortunately, we ended up losing 3 ping pong balls to 2. Our strategy had changed again to knock the balls out of the bottom of the tower and try to knock them in our goal by driving into them with our machine. If you want to see the pics of our final machine, just go to the previous post.
Just wanted to recap on how the design expo went. Judging by how well we did during lab on Wednesday, we should have beat our opponent during round 0 since we were seeded higher than them. Unfortunately, we ended up losing 3 ping pong balls to 2. Our strategy had changed again to knock the balls out of the bottom of the tower and try to knock them in our goal by driving into them with our machine. If you want to see the pics of our final machine, just go to the previous post.
Wednesday, December 5, 2012
High Rollers Video
Hey Bloggers,
Here is the official release of the High Rollers video for the design expo. Enjoy!
Here is the official release of the High Rollers video for the design expo. Enjoy!
Tuesday, December 4, 2012
High Rollers Machine
Hey Bloggers,
The High Rollers have officially finished our machine. We were able to test our machine in lab today and we made some modifications to it. We also applied the velcro to our machine for the battery pack. First of all we changed our strategy to knock off the black balls instead of knocking off the red balls. We changed up the strategy because our machine isn't able to turn on the ledge and drive straight along the ledge. Our machine is able to drive along the base and knock off the black balls though so fortunately we had that as a backup strategy to make our main strategy. We had a number of modifications we made to our machine.
The first modification we made to our machine was while we were testing it. We took off the sand paper on the front wheels because our machine can't turn with the sand paper on them.
The second modification we made went along with the first. Our machine didn't have enough traction with just the sand paper so we decided to put the rubber bands on to help our machine from slipping on the arena. I don't think it had enough traction in the first place because it wasn't heavy enough. But adding more weight would be bad for our strategy, so we had to improvise.
Another modification we made was putting rubber padding underneath the motors. It was to correct for a height difference between our motors and our pillow blocks/ arm mounts. It also cushions the chassis from motor vibrations. We also put rubber padding between the flaps and the chassis. We did this because the flaps rotate too far out and after we put rubber padding between the two it corrects for the problem.
Our final modification was to correct for the squash balls getting stuck underneath our chassis. We corrected this problem by taking copper wire and putting beads on it, and placing this underneath the chassis. It helps the balls roll more smoothly while preventing them and our machine from getting stuck.
The High Rollers have officially finished our machine. We were able to test our machine in lab today and we made some modifications to it. We also applied the velcro to our machine for the battery pack. First of all we changed our strategy to knock off the black balls instead of knocking off the red balls. We changed up the strategy because our machine isn't able to turn on the ledge and drive straight along the ledge. Our machine is able to drive along the base and knock off the black balls though so fortunately we had that as a backup strategy to make our main strategy. We had a number of modifications we made to our machine.
The first modification we made to our machine was while we were testing it. We took off the sand paper on the front wheels because our machine can't turn with the sand paper on them.
The second modification we made went along with the first. Our machine didn't have enough traction with just the sand paper so we decided to put the rubber bands on to help our machine from slipping on the arena. I don't think it had enough traction in the first place because it wasn't heavy enough. But adding more weight would be bad for our strategy, so we had to improvise.
Another modification we made was putting rubber padding underneath the motors. It was to correct for a height difference between our motors and our pillow blocks/ arm mounts. It also cushions the chassis from motor vibrations. We also put rubber padding between the flaps and the chassis. We did this because the flaps rotate too far out and after we put rubber padding between the two it corrects for the problem.
Our final modification was to correct for the squash balls getting stuck underneath our chassis. We corrected this problem by taking copper wire and putting beads on it, and placing this underneath the chassis. It helps the balls roll more smoothly while preventing them and our machine from getting stuck.
Tuesday, November 27, 2012
Most Critical Module
Hey Bloggers,
Just posting about our Most Critical Module for our machine today. The module turned out about as good as we had hoped. At first we were going to use bearings for the arm mounts, but we decided to use bushings instead because it would save us money, and the arm won't be rotating enough were friction would be a concern for the team. We had a little issue decided what we wanted to do about constraining the ball scoop from rotating too much. We had a previous plan to use epoxy and two screws, but our GSI Serge recommended to just use hot glue instead and to save the epoxy until we need it for bonding our acrylic parts. So we used hot glue and the ball scoop turned out fine. Besides those issues, we really didn't have anything else that went on with our MCM.
Just posting about our Most Critical Module for our machine today. The module turned out about as good as we had hoped. At first we were going to use bearings for the arm mounts, but we decided to use bushings instead because it would save us money, and the arm won't be rotating enough were friction would be a concern for the team. We had a little issue decided what we wanted to do about constraining the ball scoop from rotating too much. We had a previous plan to use epoxy and two screws, but our GSI Serge recommended to just use hot glue instead and to save the epoxy until we need it for bonding our acrylic parts. So we used hot glue and the ball scoop turned out fine. Besides those issues, we really didn't have anything else that went on with our MCM.
Progress Report
Hey everyone,
We have been working hard in the machine shop manufacturing parts lately so we haven't really had time to blog. At this point we are preparing for MS9, which is due tomorrow. As of right now we just have some pillow blocks, wheel sleeves, and the front axle to manufacture, then we can begin assembly.
The wheel sleeves are going to connect the rear wheels and wheel adapters to the gearboxes. Pictures will be up soon since we are almost done manufacturing the two wheel sleeves.
There are six pillow blocks total and we have one completely done, as it can be seen in the pictures at the bottom of our blog, and the rest are very close, drilling holes are all that is left.
The front axle is what needs the most work, and pictures will be up as soon as we are finished with it.
We have been working hard in the machine shop manufacturing parts lately so we haven't really had time to blog. At this point we are preparing for MS9, which is due tomorrow. As of right now we just have some pillow blocks, wheel sleeves, and the front axle to manufacture, then we can begin assembly.
The wheel sleeves are going to connect the rear wheels and wheel adapters to the gearboxes. Pictures will be up soon since we are almost done manufacturing the two wheel sleeves.
There are six pillow blocks total and we have one completely done, as it can be seen in the pictures at the bottom of our blog, and the rest are very close, drilling holes are all that is left.
The front axle is what needs the most work, and pictures will be up as soon as we are finished with it.
Tuesday, November 20, 2012
Part Pictures
Hey everyone,
We have started to manufacture parts in the Machine Shop. So scroll down to the bottom of the page to check out some pictures of parts we have manufactured.
We have started to manufacture parts in the Machine Shop. So scroll down to the bottom of the page to check out some pictures of parts we have manufactured.
Subscribe to:
Posts (Atom)








